| |
Product Description
Product Features
Product Specification
Enquire about this Product
 Product datasheet
Quickstart
Product manual
 Product firmware (v1.5.0)
Connect Asynchronous Serial devices to Ethernet networks and the Internet, simply and cost effectively with the Multenet EtherPAD Lite. The EtherPAD Lite is a versatile connectivity device that can be used in stand-alone, DIN rail or 19” rack-mount applications. It has a 10/100 Base-T Ethernet interface and a RS232/RS422/RS485 serial interface connecting an asynchronous
serial device to an Ethernet network. The EtherPAD Lite also supports full Modbus Master and Slave Bridge.
The EtherPAD Lite can be set up as a Modbus Master Bridge or Slave Bridge. The EtherPAD Lite allows your networked master MODBUS PLC, using the MODBUS/TCP protocol, to communicate with a serial device, for example a flow meter communicating using MODBUS/RTU, via the Internet. In this case, the Lite will be set-up as a MODBUS Slave bridge and will enable the MODBUS/RTU protocol of the flow meter to interface with MODBUS/TCP as used by the PLC.
- Device network connectivity via UDP/IP, TCP/IP with SNMP MIB II protocol suite.
- Device management via Telnet, BootP/TFTP, Web Browser, SNMP. Windows and Linux configuration Utility.
- Flash memory for convenient software updates.
- Low cost and Compact Size.
- Modbus Slave Bridge connecting Modbus TCP/UDP to Modbus ASCII/RTU.
- Multiple Network connections allowed to the same Serial data stream.
- DIN Rail mounting and 19" rack mounting kits available.
Software Specification:
- Network Protocols: TCP/IP, UDP/IP, BootP/DHCP, TFTP, ICMP, ARP, Proxy ARP, Telnet, FTP, HTTP, SMTP, DNS, SNMP (v1), Modbus/TCP,
Modbus/UDP, Redirector (RFC2217)
- Serial Protocols: Raw, Redirector, TC500, Modbus/RTU, Modbus/ASCII
- Parity: None, Even, Odd, Mark, Space
- Flow Control: None, Hardware (RTS/CTS), Software (XON, XOFF)
- Data Size: 5,6,7, 8
- Stop bits: 1,2
- Data Throughput: 300 - 115200 Baud per port
- Web Server (configuration)
- Password protection
- Firmware upgrade network or serial
- Multiple concurrent network connections (5 max)
Hardware Specification:
- ARM9 processor
- 16MB RAM, 8MB Flash
- 10/100 Base-T Ethernet line interface
- RS232/RS422/RS485 Serial interface
- LED indication for Ethernet and Serial port status and indicators for EtherPAD health
Physical Specification:
- Ethernet: RJ45 connector (10/100 Base-T)
- Serial port (RS232/RS422/RS485): DB9 male connector
- Enclosure: Aluminium extrusion and stainless steel faceplate.
- Dimensions: 131mm x 105mm x 54mm
- Weight: 500 grams
- PSU Weight: 600 grams
- Temperature Range Operating: 0 degrees Celsius to 60 degrees Celsius
- Temperature Range Storage: -20 degrees Celsius to 85 degrees Celsius
Electrical Specifications:
- Power requirement: 5W - 10V-30V DC or 10V-20V AC
- Connector: IBM type at rear and terminal type on the front plate for DIN Rail PSU connection
- Power supply adapter available as an option
Standards Compliance:
CE, RoHS, UL
[TOP]
|
