    |
 |
|
|
PocketPAD ROUTER |
|
| |
Product Description
Product Features
Product Specification
Product Addons
Products by Part Number
Enquire about this Product
 PocketPAD Router Product datasheet
PocketPAD Router quickstart
PocketPAD Router manual
 PocketPAD Router firmware (v1.3.0)
The PocketPAD Router is an innovative product, which connects remote devices or a remote network, to your local network over serial,
PTSN, GSM or GPRS networks. The PocketPAD Router includes support for a Dial-In PPP Service (RAS), Dial-Out (On-Demand or always on),
Proxy ARP, Masquerading/NAT, IP and Port Fowarding. Onboard tools make network monitoring convenient. New features include a DHCP server
and a Firewall.
Mounting options include a stand-alone desktop mount or a DIN-rail mount.
- Device network connectivity via UDP/IP, TCP/IP.
- Device management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial configuration interface, Windows configuration Utility.
- Flash memory for convenient software updates. Upgrade firmware over network.
- Low cost and Compact size.
- Lightweight.
- DIN Rail mounting kit available.
- Routing and PPP-over-Serial.
- Dial In or Out with Authentication (CHAP, PAP).
- Port Forwarding and Masquerading.
- DHCP server.
- Firewall.
- Two RS232 serial interfaces.
Software Specification:
- Network Protocols: TCP/IP, UDP/IP, BootP/DHCP, TFTP, ICMP, ARP, Telnet, HTTP, SNMP (v1 & v2), PPP, CHAP, PAP, DHCP
- Serial Protocols: Raw, PPP, TC500 (Burroughs Poll Select)
- Parity: None, Even, Odd, Mark, Space
- Flow Control: Hardware (RTS/CTS), Software (XON, XOFF), None
- Data Size: 5, 6, 7, 8
- Stop bits: 1, 2
- Data Throughput: Up to 230400 Baud
- Web Server (Configuration)
- Password protection
- Firmware upgrade over network or serial Kermit
Hardware Specification:
- ARM9 processor
- 16MB RAM, 4MB Flash
- 10/100 Base-T Ethernet interface
- Two RS232 Serial interfaces
- One external modem connection
- LED indication for Ethernet and Serial port status, Power & Heartbeat
Physical Specifications:
- Ethernet (10/100 Base-T): RJ45 connector
- Serial port (RS232): DB9 male connector
- Enclosure: Opaque Green Poly Carbonate
- Dimensions: 120mm x 90mm x 40mm
- Weight: 162 grams
- PSU Weight: 150 grams
- Temperature Range Operating: 0 degrees Celsius to 60 degrees Celsius
- Temperature Range Storage: -10 degrees Celsius to 70 degrees Celsius
Electrical Specification:
- Power requirement: 2W (5V DC)
- Consumption: 250mA
A light weight switchmode power supply is available. Interchangeable connector options are available. Wall mount options
include US, UK, EU, AU connectors. A figure 8 connector is also avilable for a desktop solution.
Removable DIN-rail Mounting Kit
Mount your PocketPAD on a DIN Rail.
PocketPAD |
Ports |
Flash |
RAM |
Features |
Addons |
|
2x DB9
1x RJ45
|
4 MB |
16 MB |
TCP/IP, UDP/IP, BootP/DHCP, TFTP, ICMP, ARP, Telnet, HTTP, SNMP (v1 & v2), PPP, RIP, CHAP, PAP, NAT, DHCP |
DIN Rail Kit
5V DC PSU
|
| Hardware Options |
Type |
Features |
Power Adapter
(Euro)
PROD0908 |
 |
5V DC Power Adapter with two prong Euro Plug |
Power Adapter
(USA)
PROD0909 |
 |
5V DC Power Adapter with US Plug |
Power Adapter
(Australian)
PROD0910 |
 |
5V DC Power Adapter with two prong Australian Plug |
Power Adapter
(UK)
PROD0911 |
 |
5V DC Power Adapter with three prong UK Plug |
Power Adapter
(desktop)
PROD0912 |
 |
5V DC Power Adapter with Figure 8 Desktop Plug |
DIN Rail Bracket
PROD0111 |
|
Mounting Kit for DIN rail |
[TOP]
|
|
|
